| |
The
Minco Group is located on the North side of Dayton, just Southeast of
the I-70/I-75 interchange.
Visiting
The Minco Group?
We have a new EXIT 59, Benchwood/Wyse Road.
From the South...
Take 75 North, through downtown Dayton to Exit 58, Needmore Road Exit. Turn
Right at the light onto Needmore Road. After passing the Shell Station,
Hardees, and Frisch's on your right, you willgo down a small hill. At
the next light, turn Left onto Webster Street. You will see Minco Tool
and Mold on your right, 1/2 of mile on Webster Street. For ASPM's main
plant, Turn Right just after the Minco Tool and Mold facility, onto OBCO
Court. Keep going straight, ASPM at bottom of hill.
From the North...
T ake 75 South, and go under Route 70. At the next exit, turn off
on Exit 59, Benchwood Road/Wyse Road. Turn Left onto Wyse Road.
Follow Wyse Road to the light at the bottom of the hill. Turn Right
onto Webster Street. Follow Webster street passed Stop Eight Road,
passed ASPM plant #2 (on your right), for 1-1/4 miles. Minco Tool
and Mold will be on your left, before you get to Needmore Road.
From the East/West...
Follow I-70 until you reach I-75. Take I-75 South, then follow the
"From the North..." directions.
>>
Go to Mapquest
|
|
